Welcome to the official website of AECNC PARTS Automation Technology Co., Ltd!
0

Archives

Home / Articles posted by Davis (Page 5)
March 29, 2025 BY

GE CR224





Understanding the GE CR224: A Key Component in Industrial Automation



Site Logo

Understanding the GE CR224: A Key Component in Industrial Automation

Introduction

This is the default backup site based on the primary configuration. In the ever-evolving landscape of industrial automation, the GE CR224 stands out as a critical component that not only enhances operational efficiency but also assures safety and reliability in various applications. This blog post delves into the electrical engineering importance of the GE CR224, discusses its technical specifications according to IEC60947-2, and highlights its applications in both industrial automation and renewable energy sectors.

Importance in Electrical Engineering

The GE CR224 relay is essential in the realm of electrical engineering. Relays are fundamental components used to control electrical circuits, and the CR224 exemplifies the reliability and versatility required in industrial settings. Its design and functionality make it suitable for a wide range of applications, enabling engineers to implement automated systems with minimal risk and maximum efficiency.

With increasing demands for automation in various industries, the GE CR224 plays a pivotal role in ensuring that electrical systems operate smoothly and safely. Its ability to handle multiple functions and its compatibility with various control systems make it an invaluable asset in the toolbox of electrical engineers.

Technical Specifications (IEC60947-2)

The GE CR224 complies with the IEC60947-2 standard, which outlines the requirements for low-voltage switchgear and control gear. Some key technical specifications include:

  • Rated Operational Voltage: Up to 690V AC and 440V DC
  • Rated Current: 25A to 80A, depending on the configuration
  • Insulation Resistance: Greater than 100MΩ at 500V DC
  • Dielectric Strength: 2500V AC for 1 minute between open contacts
  • Operating Temperature Range: -25°C to +55°C
  • Protection Class: IP20 (with optional IP54 enclosure)

These specifications ensure that the GE CR224 can endure demanding environments while maintaining performance integrity, making it a reliable choice for engineers and manufacturers alike.

Applications in Industrial Automation

The versatile GE CR224 relay is widely used in industrial automation applications. It is often found in motor control circuits, where it helps manage the operation of motors safely and efficiently. Furthermore, its features make it ideal for:

  • Control Panels: Integrating the CR224 in control panels allows for streamlined operations and remote control capabilities.
  • Process Automation: The relay can be used to automate various processes, reducing manual interventions and enhancing productivity.
  • Safety Systems: Its reliability ensures that safety interlocks and emergency stop functions work effectively, protecting both equipment and personnel.

Applications in Renewable Energy

In addition to its role in industrial automation, the GE CR224 is increasingly being utilized in the renewable energy sector. Its capability to manage and control power distribution makes it suitable for applications such as:

  • Solar Power Systems: The relay can be employed in solar inverter systems to enhance efficiency and reliability.
  • Wind Turbines: It helps in controlling the electrical systems that power turbines, ensuring optimal performance.
  • Energy Storage Systems: The CR224 plays a critical role in managing the charging and discharging of batteries in energy storage solutions.

Conclusion

The GE CR224 relay is an indispensable component in both industrial automation and renewable energy applications. Its adherence to IEC60947-2 standards, combined with its robust technical specifications, ensures reliability and safety across various environments. As industries move towards greater automation and sustainable energy solutions, the importance of reliable components like the GE CR224 will undoubtedly continue to grow.

For more information about the GE CR224 and other industrial automation components, visit abbpartsupply.com. For further technical standards and guidelines, you may refer to the International Electrotechnical Commission.
March 29, 2025 BY

MITSUBISHI FXAOM01AD





MITSUBISHI FXAOM01AD: A Key Component in Industrial Automation



Site Logo

MITSUBISHI FXAOM01AD: A Key Component in Industrial Automation

Introduction

This is the default backup site based on the primary configuration. In the rapidly evolving field of industrial automation, the MITSUBISHI FXAOM01AD stands out as an essential component for electrical engineers and automation professionals. This versatile device not only enhances operational efficiency but also plays a pivotal role in optimizing energy consumption, particularly in renewable energy applications.

Technical Specifications

The MITSUBISHI FXAOM01AD complies with the International Electrotechnical Commission (IEC) standard IEC60947-2, which lays down the basic requirements for low-voltage switchgear and control gear. Understanding these specifications is crucial for professionals in electrical engineering as they ensure the reliability and safety of electrical systems.

  • Rated Operational Voltage: Up to 690V AC
  • Rated Operational Current: 16A – 80A
  • Short-Circuit Protection: Integrated protection features
  • Temperature Range: -20°C to +60°C
  • Ingress Protection: IP20, ensuring protection against solid objects greater than 12mm
  • Compliance: Meets IEC60947-2 standards for enhanced safety and performance

These specifications make the FXAOM01AD a reliable choice for various applications, ensuring that it meets both safety and efficiency standards in industrial environments.

Applications in Industrial Automation and Renewable Energy

The MITSUBISHI FXAOM01AD has a wide array of applications in the field of industrial automation. Its robust design and reliable operation make it suitable for integration into various automation systems, including:

  • Manufacturing Processes: Used in automated assembly lines and robotic applications to control machinery and equipment.
  • Packaging Industry: Plays a crucial role in the automation of packaging lines, enhancing speed and accuracy.
  • HVAC Systems: Provides efficient control of heating, ventilation, and air conditioning systems, improving energy efficiency.
  • Process Control: Essential in maintaining process parameters in chemical and food processing industries.

Additionally, the MITSUBISHI FXAOM01AD is increasingly being utilized in renewable energy applications. Its ability to withstand varying environmental conditions makes it suitable for:

  • Solar Energy Systems: Controls and optimizes the performance of solar inverters, ensuring maximum energy efficiency.
  • Wind Energy Systems: Integrates with wind turbines for improved monitoring and control, enhancing energy output.
  • Energy Storage Solutions: Manages battery systems for renewables, ensuring reliable storage and distribution of energy.

By leveraging the capabilities of the FXAOM01AD, industries can enhance their automation processes, reduce downtime, and improve overall efficiency. For more detailed standards and guidelines, visit the IEC website.

Conclusion

In conclusion, the MITSUBISHI FXAOM01AD is a vital component in the landscape of industrial automation and renewable energy. Its technical specifications, compliant with IEC60947-2, ensure reliability and safety, making it a preferred choice for engineers and automation professionals. As industries continue to evolve, the importance of such devices in optimizing operations cannot be overstated. For more information and products related to industrial automation, visit abbpartsupply.com.
March 29, 2025 BY

ABB UFC760BE41 3BHE004573R0141





ABB UFC760BE41: A Key Component in Industrial Automation



Site Logo

ABB UFC760BE41: A Key Component in Industrial Automation

Introduction

In the world of industrial automation, reliability and efficiency are paramount. The ABB UFC760BE41 3BHE004573R0141 serves as a default backup site based on the primary configuration, ensuring that operations remain uninterrupted. This article delves into the electrical engineering significance of this device, its technical specifications according to IEC60947-2, and its applications across various sectors, including renewable energy.

The Importance of Electrical Engineering

Electrical engineering plays a vital role in the development and implementation of automation systems. It combines principles of physics and mathematics to design, analyze, and maintain electrical systems, which are integral to modern industries. With the increasing demand for automation in manufacturing and energy sectors, understanding components like the ABB UFC760BE41 becomes essential for engineers and technicians alike.

Technical Specifications of ABB UFC760BE41

Adhering to the standards laid out in IEC60947-2, the ABB UFC760BE41 is designed for optimal performance in challenging environments. Here are some key technical specifications:

  • Type: Circuit Breaker
  • Rated Voltage: 400V
  • Rated Current: 63A
  • Short-Circuit Protection: Yes
  • Installation: Panel Mount
  • Certifications: IEC60947-2 compliant

These specifications ensure that the ABB UFC760BE41 can handle the electrical demands of various industrial applications while providing crucial safety mechanisms against overloads and short circuits.

Applications in Industrial Automation

The versatility of the ABB UFC760BE41 makes it suitable for a wide range of applications in industrial automation. Some notable uses include:

  • Manufacturing Lines: The UFC760BE41 can protect machinery and equipment from electrical faults, ensuring continuous operation.
  • Process Automation: Used in automated processes where consistent power supply is critical, it helps maintain safety and efficiency.
  • Energy Management Systems: In renewable energy setups, it provides backup solutions to ensure reliability.

By integrating the ABB UFC760BE41 into their systems, industries can enhance safety and operational efficiency, making it a preferred choice among engineers.

Renewable Energy Applications

As the world shifts towards sustainable energy solutions, the ABB UFC760BE41 plays a significant role in renewable energy applications. It is commonly used in:

  • Solar Power Systems: The device ensures that solar inverters are protected from electrical faults, thereby maintaining system integrity.
  • Wind Turbines: Its ability to handle sudden electrical loads makes it ideal for wind energy applications, where fluctuations are common.

Utilizing the UFC760BE41 in renewable projects not only improves safety but also contributes to the overall efficiency of energy systems.
March 29, 2025 BY

ABB UFC760BE41 3BHE004573R0141





Exploring the ABB UFC760BE41: A Key Component in Industrial Automation



Site Logo

Exploring the ABB UFC760BE41: A Key Component in Industrial Automation

The ABB UFC760BE41, identified by its part number 3BHE004573R0141, serves as a vital component in the landscape of industrial automation. This device functions as a default backup site based on the primary configuration, ensuring reliability and efficiency in various electrical systems. Understanding its technical specifications and applications can significantly impact operational efficiency in industrial environments and renewable energy sectors.

Importance in Electrical Engineering

Electrical engineering is a cornerstone of modern technology, impacting various industries including manufacturing, renewable energy, and automation. The ABB UFC760BE41 exemplifies the precision and reliability expected in electrical components. As industries increasingly rely on automation to enhance productivity, the need for robust backup systems becomes crucial. The UFC760BE41 provides this backup capability, allowing for uninterrupted operation during primary system failures.

Technical Specifications

The ABB UFC760BE41 adheres to the IEC 60947-2 standard, which governs low-voltage switchgear and control gear. Key specifications of this device include:

  • Rated Operational Voltage: 690 V AC
  • Rated Current: Up to 160 A
  • Protection Class: IP54, ensuring adequate protection against dust and water ingress
  • Mounting Options: Suitable for both panel and surface mounting
  • Thermal Characteristics: Designed to perform effectively under varying thermal conditions

These specifications not only conform to international standards but also ensure that the component can be seamlessly integrated into existing systems across various applications.

Applications in Industrial Automation and Renewable Energy

The versatility of the ABB UFC760BE41 makes it an essential component in various applications.

Industrial Automation

In industrial automation, the UFC760BE41 is used to manage electrical loads, offering a reliable backup solution for systems that require constant operational integrity. Whether in manufacturing lines, assembly plants, or logistics centers, the ability to maintain seamless operation is critical. The UFC760BE41 ensures minimal downtime and enhances overall system reliability, thereby supporting productivity and operational efficiency.

Renewable Energy

As the world shifts towards sustainable energy solutions, the role of reliable electrical components in renewable energy systems has become increasingly important. The ABB UFC760BE41 is employed in solar power installations and wind energy systems, where it acts as a backup to ensure that energy flow remains consistent and stable. By providing essential control and protection, this device enables renewable energy systems to operate more effectively and efficiently, contributing to the global push for sustainable energy practices.

For more information on industrial automation standards and practices, you can refer to IEC Standards. To explore more about ABB products and solutions, visit ABB Part Supply.

Conclusion

The ABB UFC760BE41 (3BHE004573R0141) is more than just an electrical component; it embodies the principles of reliability and efficiency that are crucial in today’s fast-paced industrial environments. By adhering to IEC standards and offering versatile applications in both industrial automation and renewable energy, it stands as a testament to the importance of quality in electrical engineering. As industries continue to evolve, components like the UFC760BE41 will play a vital role in shaping the future of automation and energy management.
March 28, 2025 BY

EMERSON KJ4010X1-NB1





Understanding the EMERSON KJ4010X1-NB1 in Industrial Automation



Site Logo

Understanding the EMERSON KJ4010X1-NB1 in Industrial Automation

Introduction

This is the default backup site based on the primary configuration. In the rapidly evolving world of industrial automation, the tools and components we use play a critical role in ensuring efficiency, safety, and reliability. One such component is the EMERSON KJ4010X1-NB1, a vital part of modern electrical engineering. This blog post will delve into its electrical engineering importance, key technical specifications, and its applications in the fields of industrial automation and renewable energy.

The Importance of the EMERSON KJ4010X1-NB1 in Electrical Engineering

The EMERSON KJ4010X1-NB1 is an advanced device that serves as a crucial element in various systems, particularly in industrial automation. Electrical engineers rely on this device for its precision and reliability, which are essential in controlling and monitoring electrical systems. It ensures that operations run smoothly, minimizes downtime, and enhances safety. The use of such devices is a testament to the importance of integrating high-quality components in the design and execution of automation systems.

Technical Specifications: IEC60947-2 Compliance

Understanding the technical specifications of the EMERSON KJ4010X1-NB1 is vital for engineers looking to implement it in their systems. According to the IEC60947-2 standard, which governs low-voltage switchgear and control gear, the KJ4010X1-NB1 is designed with several key features:

  • Rated Voltage: Up to 690 V, allowing for a wide range of applications.
  • Rated Current: Capable of handling currents up to 160 A, which is essential for industrial applications.
  • Protection Class: IP20, providing adequate protection against dust and accidental contact.
  • Temperature Range: Operational range is between -25°C and +55°C, ensuring functionality in diverse environments.
  • Certifications: Compliant with international safety standards, guaranteeing reliability and safety in usage.

These specifications underscore the device’s versatility and robust performance, making it a preferred choice among engineers and technicians.

Applications in Industrial Automation

The EMERSON KJ4010X1-NB1 finds extensive applications across various industries. Its ability to manage electrical loads efficiently makes it an ideal component in industrial automation systems. Some notable applications include:

  • Process Control: Used in monitoring and controlling processes in manufacturing plants.
  • Energy Management: Optimizes the use of energy resources, critical in today’s energy-intensive environments.
  • Machine Automation: Integral in controlling machinery operations, enhancing productivity and safety.
  • Renewable Energy Systems: Plays a role in integrating renewable energy sources into the grid, supporting sustainability efforts.

The adaptability of the KJ4010X1-NB1 allows it to meet the demands of various sectors, reinforcing its significance in modern industrial operations.

Renewable Energy Integration

As industries move towards sustainability, the use of components like the EMERSON KJ4010X1-NB1 becomes even more critical. In renewable energy systems, it assists in:

  • Grid Connection: Ensuring stable and reliable connections between renewable energy sources and the grid.
  • Load Management: Facilitating the efficient distribution of power generated from renewable sources.
  • Monitoring and Control: Providing real-time data for better decision-making in energy management.

This application not only enhances operational efficiency but also supports global sustainability initiatives.

Conclusion

The EMERSON KJ4010X1-NB1 is more than just a component; it is a cornerstone of modern electrical engineering in industrial automation. Its compliance with IEC60947-2, along with its diverse applications in industrial and renewable energy sectors, highlights its significance. For further information on electrical engineering standards, you can visit IEC. For more insights into industrial automation and components like the EMERSON KJ4010X1-NB1, visit our site at abbpartsupply.com.
March 28, 2025 BY

EMERSON VE4006P2





Understanding the EMERSON VE4006P2: A Key Component in Industrial Automation



Site Logo

Understanding the EMERSON VE4006P2: A Key Component in Industrial Automation

Welcome to our blog! This is the default backup site based on the primary configuration. Today, we are delving into the vital role of the EMERSON VE4006P2 in the field of electrical engineering and its growing applications in industrial automation and renewable energy.

The Importance of Electrical Engineering

Electrical engineering is the backbone of modern industry, serving as the foundation for the development and implementation of various automation technologies. As industries evolve towards greater efficiency and sustainability, the demand for reliable and advanced electrical components like the EMERSON VE4006P2 has grown exponentially. This component is pivotal in ensuring that electrical systems function optimally, providing safety and reliability in industrial environments.

Technical Specifications of EMERSON VE4006P2

The EMERSON VE4006P2 adheres to the stringent guidelines set forth in the IEC60947-2 standard, which governs low-voltage switchgear and controlgear. Below are some of its key specifications:

  • Rated Operational Voltage (Ue): 400V AC
  • Rated Current (Ie): 6A
  • Insulation Resistance: ≥ 100 MΩ at 500V DC
  • Pollution Degree: 3
  • Temperature Range: -25°C to +70°C
  • Degree of Protection: IP20

These specifications ensure that the EMERSON VE4006P2 meets the high-performance standards required in various industrial applications, allowing for dependable operation in demanding environments.

Applications in Industrial Automation

The EMERSON VE4006P2 is widely used in industrial automation, playing a crucial role in the control and distribution of electrical power. Its application spans across various sectors, including manufacturing, food and beverage processing, and chemical production. With the increasing trend towards automation, the VE4006P2 serves as a reliable switchgear solution that enhances the safety and efficiency of automated systems.

Moreover, it is also instrumental in the integration of renewable energy systems, such as solar and wind power installations. By providing effective control and protection of electrical circuits, it enables seamless operation and integration of renewable energy sources into the existing electrical grid. This not only helps in reducing carbon footprints but also promotes sustainable energy practices.

Conclusion

In summary, the EMERSON VE4006P2 is not just a component; it is a vital element that enhances the reliability and efficiency of electrical systems in industrial automation and renewable energy applications. Understanding its specifications and applications is crucial for electrical engineers and industry professionals aiming to leverage automation technologies for improved operational performance. For more information about industrial automation solutions, visit abbpartsupply.com.

For further insights into electrical engineering standards, you can visit the International Electrotechnical Commission (IEC).
March 28, 2025 BY

EMERSON VE4050E1C0 KJ4001X1-BE1





EMERSON VE4050E1C0 KJ4001X1-BE1: A Key Component in Industrial Automation



Site Logo

EMERSON VE4050E1C0 KJ4001X1-BE1: A Key Component in Industrial Automation

Introduction

This is the default backup site based on the primary configuration. In the world of industrial automation, the integration of advanced components is essential for enhancing efficiency and reliability in various applications. One such component, the EMERSON VE4050E1C0 KJ4001X1-BE1, plays a pivotal role in electrical engineering, particularly within automation and renewable energy sectors.

Importance in Electrical Engineering

The EMERSON VE4050E1C0 KJ4001X1-BE1 is a vital device in the realm of electrical engineering. Its design and functionality contribute significantly to the optimization of power management systems. By ensuring precise control and monitoring of electrical circuits, this device helps minimize energy waste and enhance operational safety. Moreover, it adheres to international standards such as IEC60947-2, which outlines the requirements for low-voltage switchgear and controlgear, ensuring reliability and safety in various applications.

Technical Specifications

The EMERSON VE4050E1C0 KJ4001X1-BE1 complies with IEC60947-2 standards, which emphasize the importance of safety and efficiency in electrical installations. Some of its key technical specifications include:

  • Rated Operational Voltage: Up to 690 V AC
  • Rated Current: Up to 63 A
  • Short-Circuit Protection: Integrated protection mechanisms
  • Temperature Range: -25°C to +70°C
  • Degree of Protection: IP20
  • Contact Material: Silver alloy

These specifications not only ensure robust performance but also align with global safety standards, making it a reliable choice for various industrial applications.

Applications in Industrial Automation and Renewable Energy

The versatility of the EMERSON VE4050E1C0 KJ4001X1-BE1 allows it to be utilized in a wide range of applications across industrial automation and renewable energy sectors. In industrial automation, it is often employed in:

  • Process Control Systems: Enhancing the efficiency of production lines.
  • Motor Control Centers: Managing large motor systems with precision.
  • Safety Systems: Ensuring safe operation within hazardous environments.

In renewable energy applications, this component is crucial for:

  • Solar Power Systems: Optimizing energy conversion and management.
  • Wind Turbines: Enhancing control over power generation and distribution.
  • Energy Storage Solutions: Facilitating efficient energy use and management.

By integrating the EMERSON VE4050E1C0 KJ4001X1-BE1 into these systems, industries can achieve greater operational efficiency, reduced downtime, and enhanced safety protocols.

Conclusion

The EMERSON VE4050E1C0 KJ4001X1-BE1 is more than just a component; it is a cornerstone of modern electrical engineering within the realms of industrial automation and renewable energy. Its adherence to IEC60947-2 standards ensures that it meets high safety and efficiency benchmarks, making it an invaluable asset for engineers and industries alike. For further information on industrial automation standards and components, you can visit the International Electrotechnical Commission (IEC).

For more insights into industrial automation products, be sure to check out our offerings at abbpartsupply.com.
March 28, 2025 BY

EMERSON VE4003S2B1





Understanding the EMERSON VE4003S2B1: A Key Player in Industrial Automation



Site Logo

Understanding the EMERSON VE4003S2B1: A Key Player in Industrial Automation

In the rapidly evolving world of industrial automation, reliable equipment is paramount. The EMERSON VE4003S2B1 serves as a crucial component in this landscape, ensuring efficiency and safety in various applications. This blog post delves into the electrical engineering importance of this device, its technical specifications under the IEC60947-2 standard, and its diverse applications in both industrial automation and renewable energy sectors.

The Importance of Electrical Engineering in Industrial Automation

Electrical engineering is at the heart of industrial automation. It encompasses the design, development, and maintenance of electrical systems that power machinery and control processes. The EMERSON VE4003S2B1 exemplifies the integration of electrical engineering principles into automation solutions, making it essential for optimizing performance and enhancing productivity in industrial settings.

Technical Specifications of the EMERSON VE4003S2B1

The EMERSON VE4003S2B1 adheres to the IEC60947-2 standard, which outlines the requirements for low-voltage switchgear and control gear. This standard is crucial for ensuring the safety and reliability of electrical equipment. Here are some notable technical specifications of the VE4003S2B1:

  • Voltage Rating: Suitable for a wide range of operating voltages.
  • Current Rating: Capable of handling significant currents, ensuring robust performance in demanding applications.
  • Protection Class: Designed with a high degree of protection for use in industrial environments.
  • Temperature Range: Operates effectively in various temperature conditions, enhancing its adaptability.
  • Durability: Built to withstand harsh industrial conditions, ensuring longevity and consistent performance.

Applications in Industrial Automation and Renewable Energy

The versatility of the EMERSON VE4003S2B1 allows it to be employed in numerous applications across industrial automation and renewable energy sectors. Below are some key areas where this device excels:

  • Manufacturing Processes: The VE4003S2B1 is integral to automated manufacturing processes, where it manages operations and ensures equipment reliability.
  • Energy Management: In renewable energy systems, such as solar and wind installations, the VE4003S2B1 contributes to efficient energy distribution and conversion.
  • Process Control: The device is used in process control applications, enhancing precision and reducing operational risks.
  • Safety Systems: Its compliance with IEC60947-2 ensures that it meets safety standards necessary for protecting personnel and equipment.
  • Smart Grids: The VE4003S2B1 plays a role in smart grid technology, facilitating the integration of renewable energy sources into existing power systems.

Conclusion

The EMERSON VE4003S2B1 stands out as a vital component in the realm of industrial automation. Its technical specifications, grounded in IEC60947-2 standards, affirm its reliability and safety in various applications. As industries continue to evolve, the importance of integrating robust electrical engineering solutions, such as the VE4003S2B1, will only grow.

For more information on industrial automation components, visit abbpartsupply.com. To learn more about electrical safety standards, check out the International Electrotechnical Commission (IEC).
March 28, 2025 BY

KOLLMORGEN S22460-SRS





KOLLMORGEN S22460-SRS: A Key Component in Electrical Engineering and Industrial Automation



Site Logo

KOLLMORGEN S22460-SRS: A Key Component in Electrical Engineering and Industrial Automation

Welcome to our blog! Today, we delve into the KOLLMORGEN S22460-SRS, a pivotal component in the realm of electrical engineering and industrial automation. This post serves as the default backup site based on the primary configuration, ensuring that you have access to vital information regarding this essential piece of technology.

The Importance of Electrical Engineering in Automation

Electrical engineering plays a crucial role in industrial automation. The design, development, and maintenance of electrical systems are foundational to modern manufacturing and energy systems. In the context of renewable energy, effective electrical engineering is even more critical, enabling the integration of sustainable practices into existing infrastructures.

KOLLMORGEN S22460-SRS: Technical Specifications

The KOLLMORGEN S22460-SRS is designed in accordance with IEC60947-2, which outlines the standards for low-voltage switchgear and controlgear. This device is built for high performance in various demanding environments, ensuring safety, reliability, and efficiency. Here are some key technical specifications:

  • Voltage Rating: Up to 600V AC
  • Current Rating: 60A
  • Insulation Resistance: ≥ 100 MΩ
  • Temperature Range: -10°C to +60°C
  • Protection Class: IP20
  • Short-Circuit Protection: Integrated features compliant with IEC60947-2 standards

Applications in Industrial Automation

The KOLLMORGEN S22460-SRS is a versatile component widely used in various industrial automation applications. Its ability to manage electrical systems efficiently makes it suitable for:

  • Robotic Systems: Ensuring precise control of motors and actuators.
  • Manufacturing Lines: Optimizing the performance of conveyor systems and automated machinery.
  • Process Control: Monitoring and controlling industrial processes for enhanced productivity.

Renewable Energy Integration

As industries shift towards sustainability, the KOLLMORGEN S22460-SRS also finds applications in renewable energy setups. It is essential for:

  • Wind Turbines: Managing the electrical output and ensuring stable grid integration.
  • Solar Inverters: Converting solar energy into usable electricity while maintaining system integrity.
  • Energy Storage Systems: Facilitating the safe and efficient storage of energy generated from renewable sources.

Conclusion

The KOLLMORGEN S22460-SRS is an exemplary component that showcases the convergence of electrical engineering and industrial automation. With its robust technical specifications and versatile applications, it plays a significant role in enhancing productivity and sustainability in various sectors.

For more information about this product and others in the field of industrial automation, visit ABB Part Supply or check out resources from authoritative organizations such as the International Electrotechnical Commission (IEC).
March 28, 2025 BY

AMAT 0021-84842





Understanding AMAT 0021-84842: A Key Component in Industrial Automation




Site Logo

Understanding AMAT 0021-84842: A Key Component in Industrial Automation

Welcome to our blog! This is the default backup site based on the primary configuration, where we share insights and knowledge about industrial automation components and systems.

The Importance of AMAT 0021-84842 in Electrical Engineering

The AMAT 0021-84842 is a vital component in the realm of electrical engineering, particularly in the context of industrial automation. As industries continually strive for increased efficiency, reliability, and safety, components like the AMAT 0021-84842 become essential. This component is designed to manage electrical functions and ensure that systems operate smoothly, minimizing the risk of downtime and improving overall productivity.

Technical Specifications: IEC60947-2 Compliance

One of the key aspects that make the AMAT 0021-84842 stand out is its compliance with the IEC60947-2 standard. This standard outlines the requirements for low-voltage switchgear and control gear, ensuring that devices meet stringent safety and performance criteria.

  • Rated Operational Voltage: The AMAT 0021-84842 typically operates within a range compliant with industrial standards, making it suitable for various applications.
  • Rated Current: Its rated current capabilities allow it to handle significant loads, essential for robust industrial environments.
  • Short-Circuit Protection: Incorporating features to manage short-circuit conditions enhances safety and reliability, vital in preventing equipment damage.
  • Temperature Ratings: Designed to operate efficiently under various temperature conditions, ensuring reliability in diverse operational environments.

Applications in Industrial Automation

The AMAT 0021-84842 is utilized in a wide range of applications within industrial automation. Some key areas include:

  • Process Control Systems: It plays a crucial role in controlling processes in manufacturing plants, ensuring that production runs smoothly.
  • Robotics: In robotic applications, the AMAT 0021-84842 is used to manage power distribution, enabling precise control over robotic movements.
  • Conveyor Systems: The component ensures that conveyor belts operate efficiently, reducing the risk of jams and breakdowns.
  • Monitoring and Control Systems: It is often integrated into monitoring systems that oversee operational parameters, enhancing safety and efficiency.

Renewable Energy Applications

As the world shifts towards renewable energy sources, the AMAT 0021-84842 finds a critical place in this transition. Its applications in renewable energy systems include:

  • Solar Power Systems: The component helps manage the electrical functions of solar installations, ensuring optimal energy conversion and distribution.
  • Wind Energy Systems: In wind turbines, the AMAT 0021-84842 manages the power generated, facilitating efficient energy transfer to the grid.
  • Energy Storage Solutions: It plays a vital role in battery management systems, ensuring safety and reliability in energy storage applications.

Conclusion

In summary, the AMAT 0021-84842 is a fundamental component in the fields of electrical engineering and industrial automation. Its compliance with IEC60947-2 standards ensures safety and reliability, making it indispensable across various applications, including renewable energy. As industries continue to innovate, components like the AMAT 0021-84842 will remain at the forefront, driving efficiency and sustainability.

For more information on industrial automation components, visit abbpartsupply.com. To learn more about electrical safety standards, you can check out resources from the International Electrotechnical Commission.


Menu

Search for products

Back to Top
Product has been added to your cart